VES Industrial Services Sdn Bhd
17, Jalan BA/10,
Kawasan Perusahaan Bukit Angkat,
43000 Kajang,
Selangor, Malaysia.
+603-8741 5489
+603-8741 2489

Claw Vacuum Pumps

Rotary claw vacuum pumps are dry, positive displacement pumps that consist of a pumping chamber and two counter-rotating, synchronized, non-contacting claws. The gas enters through the inlet where the gas is filtered by the inlet screen. The gas enters the pumping chamber. The precisely-dimensioned claws rotate. The small gap between the claws compresses the gas such that the inlet side has a lower pressure and the high pressure is on the discharge. The oil-free gas is then discharged through the silencer


The VCX Series pumps are dry contact-less vacuum pumps with modular constructions consisting of compartments: pumping and gear chambers are separated by using labyrinth seals., As two claws rotate in opposite direction, the air will be sucked in the pumping chamber, compressed and discharged under pressure. In gear chamber, two gears for synchronizing of claws rotation will be placed with appropriate oil lubrication. A built-in anti-suck back valve installed in inlet flange will prevent the air from flowing back into the vacuum chamber when the pump is shutdown. The pumps are directly driven by a flanged motor via a coupling

VCX- 155 / 205

   
   
The VCX-B Series pumps are dry contact-less vacuum pumps with modular constructions consisting of compartments: pumping and gear chambers are separated by using labyrinth seals., As two claws rotate in opposite direction, the air will be sucked in the pumping chamber, compressed and discharged under pressure. In gear chamber, two gears for synchronizing of claws rotation will be placed with appropriate oil lubrication. A built-in anti-suck back valve installed in inlet flange will prevent the air from flowing back into the vacuum chamber when the pump is shutdown. The pumps are directly driven by a flanged motor via a coupling


VCX- 60, 100, 150, 250, 300, 400 & 505

   
   

Switch to Mobile Version