VES Industrial Services Sdn Bhd
17, Jalan BA/10,
Kawasan Perusahaan Bukit Angkat,
43000 Kajang,
Selangor, Malaysia.
17, Jalan BA/10,
Kawasan Perusahaan Bukit Angkat,
43000 Kajang,
Selangor, Malaysia.
+603-8741 5489
+603-8741 2489
Products
Claw compressors have been developed specifically for industrial applications in which constant pressure, high pumping speed and completely oil-free compression are essential. Air is compressed with considerable energy savings compared to the traditional rotary lobe design due to contact free rotor design and oil, or any operating liquid, free operation | |||
PCX- 60, 100, 150, 250, 300, 400 & 505 | PCX- 155 / 205 | ||
Rotary claw vacuum pumps are dry, positive displacement pumps that consist of a pumping chamber and two counter-rotating, synchronized, non-contacting claws. The gas enters through the inlet where the gas is filtered by the inlet screen. The gas enters the pumping chamber. The precisely-dimensioned claws rotate. The small gap between the claws compresses the gas such that the inlet side has a lower pressure and the high pressure is on the discharge. The oil-free gas is then discharged through the silencer | |||
VCX- 60, 100, 150, 250, 300, 400 & 505 | VCX- 155 / 205 | ||
Wonchang’s Dry Rotary Vane Pumps operate according to the rotary vane principal. The rotor is eccentrically positioned in the pump cylinder and has the machined slots for sliding of the vanes. The centrifugal forces of the rotation pushes vanes out towards the wall of the cylinder. The gas enters vacuum pump through the inlet manifold (Air filter) and is compressed and pushed out through the outlet manifold (built-in silencer) installed on pump module. The regulators installed on manifold are adopted for regulating vacuum or pressure level constantly. Carbon material vane is employed for self-lubrication. | |||
WBS - 30A, 50A, 60A & 80A | WBS - 80B, 85B, 90B, 95B &100B | WVH- 3, 5 | WVS- 3, 5& 6, 3H, 5H & 6H |
Wonchang’s Oil Sealed Rotary Vane Pumps operate according to the rotary vane principle. The rotor is eccentrically positioned in the cylinder and has the slots for vane sliding. The centrifugal forces when rotates push the vanes towards wall of the cylinder through the slots of the rotor. The gas will be sucked in through a built-in anti suck back valve that prevents the pump from rotating backward at standstill, and goes into the cylinder. The gas will be compressed and pushed out through the exhaust opening located between the pumps housing and oil sump. | |||
WOVP-0020, 0030 & 0040 | WOVP-060 & 080 | WOVP-120 & 200 | WOVP-320 & 430 |
Side Channel Blowers - Can be defined as positive displacement, rotary machines used to move air or other gases. Their simple design makes them low cost and their non-contact configuration means they have no wearing parts so they are ultra-reliable. Our Side Channel Blowers comes in single and double stage models | |||
Side Channel Blower | |||
Wonchang B Series vacuum boosters are positive Displacement, roots-type blowers intended for use in Conjunction with a mechanical backing pump. The B booster pumps have a simple weighted By pass design that allows start-up from atmosphere. | |||
B- 500, 1200 & 2600 | |||
Medical System | Vacuum Pumps System | Vacuum Pumps System | |
Maintenance Kit 3 | Maintenance Kit 2 | Maintenance Kit 1 | |
We promise high quality product to meet your needs. If you have any questions, please feel free contact us to help with your specific needs, including service of your existing equipment. | |||
WOVP Series VANE | WVS / WBS Series VANE | OIL FILTERS | KITS |